| Last Modified: 4-30-2014 | 6.6 A | Doc ID: RM000001BJA001X |
| Model Year: 2006 | Model: LX470 | Prod Date Range: [05/2005 - ] |
| Title: TIRE AND WHEEL: TIRE PRESSURE WARNING ECU: REPLACEMENT; 2006 MY LX470 [05/2005 - ] | ||
REPLACEMENT
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
2. REMOVE GLOVE COMPARTMENT DOOR SUB-ASSEMBLY
|
3. REMOVE TIRE PRESSURE WARNING ECU (a) Disconnect the connector. (b) Remove the 2 bolts and ECU. |
|
|
4. INSTALL TIRE PRESSURE WARNING ECU (a) Install the ECU with the 2 bolts. (b) Connect the connector. |
|
5. INSTALL GLOVE COMPARTMENT DOOR SUB-ASSEMBLY
6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
7. PERFORM INITIALIZATION
(a)
Perform initialization
![2006 MY LX470 [05/2005 - ]; INTRODUCTION: REPAIR INSTRUCTION: INITIALIZATION](../../../../stylegraphics/info.gif "2006 MY LX470 [05/2005 - ]; INTRODUCTION: REPAIR INSTRUCTION: INITIALIZATION")
.
NOTICE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
|
|