|
Last Modified: 4-30-2014 |
6.6 C |
Doc ID: RM000001CF6001X |
|
Model Year: 2006 |
Model: LX470 |
Prod Date Range: [05/2005 -
] |
|
Title: TIRE AND WHEEL: TIRE PRESSURE WARNING SYSTEM: C2195/95; Multi-receiver Antenna Circuit (Test Mode DTC); 2006 MY LX470 [05/2005 - ] |
|
DTC
|
C2195/95
|
Multi-receiver Antenna Circuit (Test Mode DTC)
|
DESCRIPTION
|
DTC No.
|
DTC Detecting Condition
|
Trouble Area
|
|
C2195/95
|
In test mode, tire pressure antenna circuit malfunction occurs
|
-
Tire pressure monitor ECU
|
WIRING DIAGRAM
INSPECTION PROCEDURE
NOTICE:
It is necessary to register an ID code after replacing the tire pressure monitor valve sub-assembly and / or the tire pressure monitor ECU
.
PROCEDURE
|
1.
|
CHECK WIRE HARNESS (ANTENNA - ECU)
|
|
(a) Disconnect the T36 ECU connector.
|
|
(b) Disconnect the T40 and T41 antenna connectors.
(c) Measure the resistance of the wire harness side connectors.
Standard resistance:
|
Tester Connection
|
Specified Condition
|
|
T36-3 (ANTL) - T40-1
|
Below 1 Ω
|
|
T36-2 (ANTR) - T41-1
|
Below 1 Ω
|
| NG |
|
REPAIR OR REPLACE HARNESS AND CONNECTOR
|
| OK |
|
|
|
2.
|
REPLACE OUTER MIRROR RETRACTOR (TIRE PRESSURE ANTENNA)
|
| NEXT |
|
|
(a)
Check test mode DTC
.
OK:
DTC is not output.
| NG |
|
REPLACE TIRE PRESSURE MONITOR ECU
|
| OK |
|
END
|
|