|
Last Modified: 4-30-2014 |
6.6 J |
Doc ID: RM000001CHQ001X |
|
Model Year: 2006 |
Model: LX470 |
Prod Date Range: [05/2005 -
] |
|
Title: DOOR LOCK: KEY REMINDER WARNING SYSTEM: Unlock Warning Switch Circuit; 2006 MY LX470 [05/2005 - ] |
|
Unlock Warning Switch Circuit
|
SYSTEM DESCRIPTION
The key unlock warning switch goes on when the ignition key is inserted in the key cylinder and goes off when the ignition key is removed. The ECU operates the key confinement prevention function while the key unlock warning switch is ON.
WIRING DIAGRAM
INSPECTION PROCEDURE
HINT:
When using the intelligent tester, start from *1. When not using the intelligent tester, start from *2.
PROCEDURE
|
1.
|
READ VALUE USING INTELLIGENT TESTER (KEY UNLOCK WARNING SWITCH) *1
|
(a)
Check the DATA LIST for proper functioning of the key unlock warning switch operation
.
| OK |
|
GO TO NEXT CIRCUIT INSPECTION SHOWN ON PROBLEM SYMPTOMS TABLE
|
| NG |
|
|
|
2.
|
CHECK UNLOCK WARNING SWITCH ASSEMBLY *2
|
(a)
Check the unlock warning switch
.
| NG |
|
REPLACE UNLOCK WARNING SWITCH ASSEMBLY
|
| OK |
|
|
|
3.
|
CHECK WIRE HARNESS (WARNING SWITCH - BODY ECU (MAIN))
|
| NG |
|
REPAIR OR REPLACE HARNESS AND CONNECTOR
|
| OK |
|
GO TO NEXT CIRCUIT INSPECTION SHOWN ON PROBLEM SYMPTOMS TABLE
|
|