| Last Modified: 4-30-2014 | 6.6 J | Doc ID: RM000001DEA001X |
| Model Year: 2006 | Model: LX470 | Prod Date Range: [05/2005 - ] |
| Title: SUPPLEMENTAL RESTRAINT SYSTEM: AIRBAG SYSTEM: SRS Warning Light does not Come ON; 2006 MY LX470 [05/2005 - ] | ||
|
SRS Warning Light does not Come ON |
DESCRIPTION
WIRING DIAGRAM
Refer to "SRS warning light remains ON"
![2006 MY LX470 [05/2005 - ]; SUPPLEMENTAL RESTRAINT SYSTEM: AIRBAG SYSTEM: SRS Warning Light Remains ON+](../../../../stylegraphics/info.gif "2006 MY LX470 [05/2005 - ]; SUPPLEMENTAL RESTRAINT SYSTEM: AIRBAG SYSTEM: SRS Warning Light Remains ON+")
.
INSPECTION PROCEDURE
PROCEDURE
|
1. |
INSPECT FUSE |
(a) Remove the AM2 fuse of the engine room junction block.
(b) Measure the resistance of the fuse.
Standard resistance:
Below 1 Ω
| NG |
|
|
|
2. |
CHECK COMBINATION METER ASSEMBLY |
|
(a) Turn the ignition switch to LOCK. (b) Disconnect the negative (-) terminal cable from the battery, and wait at least for 90 seconds. (c) Disconnect the C16 center airbag sensor connector. (d) Connect the negative (-) terminal cable to the battery, and wait at least for 2 seconds. (e) Turn the ignition switch to ON. (f) Measure the voltage between the body ground and LA of the C32 center airbag sensor connector. Standard voltage: 10 to 14 V |
|
| NG |
|
|
|
3. |
CHECK SRS WARNING LIGHT |
|
(a) Turn the ignition switch to LOCK, and wait for at least 60 seconds. (b) Turn the ignition switch to ON. (c) Check operation of the SRS warning light. OK: SRS warning light comes on. |
|
| NG |
|
| OK |
|
|
|