| Last Modified: 4-30-2014 | 6.6 A | Doc ID: RM000001DUE001X |
| Model Year: 2006 | Model: LX470 | Prod Date Range: [05/2005 - ] |
| Title: SUSPENSION CONTROL: DAMPING FORCE CONTROL ACTUATOR: REPLACEMENT; 2006 MY LX470 [05/2005 - ] | ||
REPLACEMENT
|
1. REMOVE GAS CHAMBER (a) Place damping force control actuator in a vise. (b) Using SST, remove the gas camber. SST: 09922-10010 (c) Remove the O-ring and back up ring from the gas chamber |
|
2. INSTALL GAS CHAMBER
(a) Install a new back up ring and O-ring to the gas chamber.
NOTICE:
Be careful not to damage the O-ring.
(b) Coat the O-ring with suspension fluid AHC.
|
(c) Using SST, install the gas chamber. SST: 09922-10010 Torque: 25 N·m {250 kgf·cm, 18ft·lbf} HINT: Use a torque wrench with a fulcrum length of 345 mm (13.58 in.). NOTICE: Use SST (09922-10010) in direction shown in the illustration. |
|
|
|