Last Modified: 7-3-2017 6.8:8.0.40 Doc ID: RM000000W6Q00BX
Model Year Start: 2007 Model: LX470 Prod Date Range: [08/2006 -           ]
Title: 2UZ-FE ENGINE MECHANICAL: DRIVE BELT: INSPECTION; 2007 MY LX470 [08/2006 -        ]

INSPECTION

1. INSPECT DRIVE BELT

(a) Visually check the belt for excessive wear, frayed cords, etc.

HINT:

  • If any defect is found, replace the drive belt.
  • Cracks on the rib side of a belt are considered acceptable.

    If the belt has chunks missing from the ribs, it should be replaced.

(b) Check that it fits properly in the ribbed grooves.

HINT:

Check with your hand to confirm that the belt has not slipped out of the groove on the bottom of the pulley.