|
Last Modified: 7-3-2017 |
6.8:8.0.40 |
Doc ID: RM000000W7C03UX |
|
Model Year Start: 2007 |
Model: LX470 |
Prod Date Range: [08/2006 -
] |
|
Title:
A750F AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMISSION SYSTEM: MANUAL SHIFTING TEST; 2007 MY LX470 [08/2006 - ]
|
MANUAL SHIFTING TEST
1. MANUAL SHIFTING TEST
HINT:
-
Through this test, it can be determined whether the trouble occurs in the electrical circuit or if it is a mechanical problem in the transmission.
-
If any abnormalities are found in the following test, the problem is in the transmission itself.
|
(a) Disconnect the connector of the transmission wire.
HINT:
It is possible to deactivate the electrical shift control by disconnecting the transmission wire. The gear positions can then be changed mechanically with the shift lever.
|
|
(b) Drive with the transmission wire disconnected. Move the shift lever to each position to check whether the gear position changes as shown in the table below.
|
Shift Lever Position
|
Gear Position
|
|
D
|
4th
|
|
4
|
4th
|
|
3
|
3rd
|
|
2
|
1st
|
|
L
|
1st
|
|
R
|
R
|
|
P
|
P
|
(c) Connect the connector of the transmission wire.
(d)
Clear the DTC
.
|