| Last Modified: 7-3-2017 | 6.8:8.0.40 | Doc ID: RM000000XFF01LX |
| Model Year Start: 2007 | Model: LX470 | Prod Date Range: [08/2006 - ] |
| Title: SUPPLEMENTAL RESTRAINT SYSTEM: AIRBAG SYSTEM: CHECK MODE PROCEDURE; 2007 MY LX470 [08/2006 - ] | ||
CHECK MODE PROCEDURE
1. CHECK MODE (SIGNAL CHECK) DTC CHECK
|
(a) Connect the intelligent tester (with CAN VIM) to the DLC3. |
|
(b) Turn the ignition switch ON.
(c) Select the "SIGNAL CHECK", and proceed checking with the intelligent tester.
NOTICE:
Select the "SIGNAL CHECK" from the "DTC CHECK" screen displayed on the intelligent tester to clear the output DTCs (both present and past).
HINT:
- DTCs can be detected more sensitively in check mode than in normal diagnosis mode.
- Perform check mode inspection when a malfunction in each squib circuit is suspected even after the normal system code is output through normal diagnosis mode inspection.
|
|