Last Modified: 7-3-2017 6.8:8.0.40 Doc ID: RM000000XU700SX
Model Year Start: 2007 Model: LX470 Prod Date Range: [08/2006 -           ]
Title: SEAT: FRONT POWER SEAT CONTROL SYSTEM (w/ Memory): HOW TO PROCEED WITH TROUBLESHOOTING; 2007 MY LX470 [08/2006 -        ]

HOW TO PROCEED WITH TROUBLESHOOTING

HINT:

  • Use these procedures to troubleshoot the front power seat control system.
  • *: Use the intelligent tester.

1.

VEHICLE BROUGHT TO WORKSHOP
NEXT

2.

INSPECT BATTERY VOLTAGE

Standard voltage:

11 to 14 V

If the voltage is below 11 V, recharge or replace the battery before proceeding.

NEXT

3.

INSPECT COMMUNICATION FUNCTION OF MULTIPLEX COMMUNICATION SYSTEM (BEAN)*

(a) Use the intelligent tester to check if the Multiplex Communication System (MPX) is functioning normally.

Result:

Result

Proceed to

MPX DTC is not output

A

MPX DTC is output

B
B

Go to MULTIPLEX COMMUNICATION SYSTEM
A

4.

PROBLEM SYMPTOMS TABLE

Result:

Result

Proceed to

Fault is not listed in problem symptoms table

A

Fault is listed in problem symptoms table

B
B

Go to step 6
A

5.

OVERALL ANALYSIS AND TROUBLESHOOTING*

(a) DATA LIST / ACTIVE TEST 2007 MY LX470 [08/2006 -        ]; SEAT: FRONT POWER SEAT CONTROL SYSTEM (w/ Memory): DATA LIST / ACTIVE TEST

(b) Terminals of ECU 2007 MY LX470 [08/2006 -        ]; SEAT: FRONT POWER SEAT CONTROL SYSTEM (w/ Memory): TERMINALS OF ECU

(c) On-vehicle Cleaning 2007 MY LX470 [08/2006 -        ]; SEAT: FRONT POWER SEAT CONTROL SYSTEM (w/ Memory): ON-VEHICLE CLEANING

NEXT

6.

REPAIR OR REPLACE
NEXT

7.

CONFIRMATION TEST
NEXT

END