|
Last Modified: 7-3-2017 |
6.8:8.0.40 |
Doc ID: RM0000010JL00JX |
|
Model Year Start: 2007 |
Model: LX470 |
Prod Date Range: [08/2006 -
] |
|
Title:
SUPPLEMENTAL RESTRAINT SYSTEM: FRONT AIRBAG SENSOR: ON-VEHICLE INSPECTION; 2007 MY LX470 [08/2006 - ]
|
ON-VEHICLE INSPECTION
1. CHECK FRONT AIRBAG SENSOR (VEHICLE NOT INVOLVED IN COLLISION AND AIRBAG NOT DEPLOYED)
(a)
Perform a diagnostic system check
.
2. CHECK FRONT AIRBAG SENSOR (VEHICLE INVOLVED IN COLLISION AND AIRBAG NOT DEPLOYED)
(a)
Perform a diagnostic system check
.
(b) If the front fender of the vehicle or its periphery are damaged, perform a visual check:
-
Check for cracks, dents or chips in the case.
-
Check for cracks, dents, chips and scratches in the connector.
-
Check for peeling of the label or damage on the serial number.
-
If any of the defects mentioned above are present, replace the front airbag sensor with a new one.
3. CHECK FRONT AIRBAG SENSOR (VEHICLE INVOLVED IN COLLISION AND AIRBAG DEPLOYED)
(a) Replace the front airbag sensor.
CAUTION:
For removal and installation of the front airbag sensor, be sure to follow the correct procedures.
HINT:
If the airbags have deployed, replace the front airbag sensor on the side in which the collision occurred. Replace both if necessary.
|