| Last Modified: 7-3-2017 | 6.8:8.0.40 | Doc ID: RM0000017FN006X |
| Model Year Start: 2007 | Model: LX470 | Prod Date Range: [08/2006 - ] |
| Title: 2UZ-FE ENGINE CONTROL SYSTEM: CAMSHAFT POSITION SENSOR: INSTALLATION; 2007 MY LX470 [08/2006 - ] | ||
INSTALLATION
1. INSTALL CAMSHAFT POSITION SENSOR
|
(a) Install the camshaft position sensor with the bolt and stud bolt. Torque: 7.5 N·m {76 kgf·cm, 66in·lbf} |
|
2.
INSTALL NO. 3 TIMING BELT COVER SUB-ASSEMBLY BANK 1
![2007 MY LX470 [08/2006 - ]; 2UZ-FE ENGINE MECHANICAL: TIMING BELT: INSTALLATION+](../../../../stylegraphics/info.gif "2007 MY LX470 [08/2006 - ]; 2UZ-FE ENGINE MECHANICAL: TIMING BELT: INSTALLATION+")
3.
CONNECT NO. 1 RADIATOR HOSE
4.
INSTALL INTAKE AIR CONNECTOR PIPE
5.
INSTALL V-BANK COVER SUB-ASSEMBLY
6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
7. PERFORM INITIALIZATION
(a)
Perform initialization
.
NOTICE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
8.
ADD ENGINE COOLANT
9. CHECK FOR ENGINE COOLANT LEAKS
(a)
Check for engine coolant leaks
.
|
|