Last Modified: 7-3-2017 6.8:8.0.40 Doc ID: RM0000017FS004X
Model Year Start: 2007 Model: LX470 Prod Date Range: [08/2006 -           ]
Title: 2UZ-FE ENGINE CONTROL SYSTEM: CRANKSHAFT POSITION SENSOR: INSPECTION; 2007 MY LX470 [08/2006 -        ]

INSPECTION

1. INSPECT CRANKSHAFT POSITION SENSOR

(a) Measure the resistance between the terminals.

Standard resistance:

Temperature

Specified Condition

Cold

1,630 to 2,740 Ω

Hot

2,065 to 3,225 Ω

NOTICE:

In the table above, the terms "cold" and "hot" refer to the temperature of the coils. "Cold" means approximately -10 to 50°C (14 to 122°F). "Hot" means approximately 50 to 100°C (122 to 212°F).

If the result is not as specified, replace the sensor.