| Last Modified: 7-3-2017 | 6.8:8.0.40 | Doc ID: RM0000017FZ006X |
| Model Year Start: 2007 | Model: LX470 | Prod Date Range: [08/2006 - ] |
| Title: 2UZ-FE ENGINE CONTROL SYSTEM: THROTTLE BODY: INSTALLATION; 2007 MY LX470 [08/2006 - ] | ||
INSTALLATION
1. INSTALL THROTTLE BODY
|
(a) Install a new gasket and the throttle body with the 3 bolts and nut. Torque: 14 N·m {142 kgf·cm, 10ft·lbf} |
|
|
(b) Connect the 2 water by-pass hoses. |
|
(c) Connect the throttle position sensor and control connector.
2.
INSTALL INTAKE AIR CONNECTOR PIPE
![2007 MY LX470 [08/2006 - ]; 2UZ-FE ENGINE CONTROL SYSTEM: CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY: INSTALLATION+](../../../../stylegraphics/info.gif "2007 MY LX470 [08/2006 - ]; 2UZ-FE ENGINE CONTROL SYSTEM: CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY: INSTALLATION+")
3.
INSTALL V-BANK COVER SUB-ASSEMBLY
4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
5. PERFORM INITIALIZATION
(a)
Perform initialization
.
NOTICE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
6.
ADD ENGINE COOLANT
7. CHECK FOR ENGINE COOLANT LEAKS
(a)
Check for engine coolant leaks
.
|
|