Last Modified: 7-3-2017 6.8:8.0.40 Doc ID: RM0000017GE004X
Model Year Start: 2007 Model: LX470 Prod Date Range: [08/2006 -           ]
Title: 2UZ-FE ENGINE CONTROL SYSTEM: ECM: INSTALLATION; 2007 MY LX470 [08/2006 -        ]

INSTALLATION

1. INSTALL ECM ASSEMBLY

(a) Install the ECM with the 3 screws.

Torque:

5.5 N·m {56 kgf·cm, 49in·lbf}

(b) Connect the 5 ECM connectors.

NOTICE:

Be sure to securely connect the connectors.

2. INSTALL NO. 2 FINISH PANEL LOWER

(a) Install the No. 2 finish panel lower with the 3 screws.

3. INSTALL GLOVE BOX COMPARTMENT DOOR

(a) Install the glove compartment door with the 2 screws.

4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

5. PERFORM INITIALIZATION

Perform initialization 2007 MY LX470 [08/2006 -        ]; INTRODUCTION: REPAIR INSTRUCTION: INITIALIZATION .

NOTICE:

Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.