Last Modified: 7-3-2017 6.8:8.0.40 Doc ID: RM0000017P3006X
Model Year Start: 2007 Model: LX470 Prod Date Range: [08/2006 -           ]
Title: 2UZ-FE IGNITION: IGNITION COIL: INSTALLATION; 2007 MY LX470 [08/2006 -        ]

INSTALLATION

1. INSTALL IGNITION COIL ASSEMBLY

(a) Install the ignition coil with the bolt.

Torque:

7.5 N·m {76 kgf·cm, 66in·lbf}

(b) Connect the connector.

2. CONNECT ENGINE WIRE

(a) Connect the 2 engine wire clamps to the cylinder head cover LH side.

3. INSTALL INTAKE AIR CONNECTOR PIPE 2007 MY LX470 [08/2006 -        ]; 2UZ-FE ENGINE CONTROL SYSTEM: CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY: INSTALLATION+

4. INSTALL V-BANK COVER SUB-ASSEMBLY 2007 MY LX470 [08/2006 -        ]; 2UZ-FE ENGINE CONTROL SYSTEM: CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY: INSTALLATION+

5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

6. PERFORM INITIALIZATION

(a) Perform initialization 2007 MY LX470 [08/2006 -        ]; INTRODUCTION: REPAIR INSTRUCTION: INITIALIZATION .

NOTICE:

Certain systems need to be initialized after disconnecting the cable from the negative (-) battery terminal.