| Last Modified: 7-3-2017 | 6.8:8.0.40 | Doc ID: RM0000017S6005X |
| Model Year Start: 2007 | Model: LX470 | Prod Date Range: [08/2006 - ] |
| Title: 2UZ-FE EMISSION CONTROL: CANISTER: REMOVAL; 2007 MY LX470 [08/2006 - ] | ||
REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
2. REMOVE CANISTER ASSEMBLY
|
(a) Disconnect the connector and detach the clamp. |
|
(b) Disconnect the 2 tubes and hose.
|
(1) Using a screwdriver, pry up the retainer. HINT: Do not remove the retainer. |
|
|
(2) Disconnect the purge line hose. |
|
(3) Disconnect the air inlet line tube from the canister filter.
(4) Disconnect the vent line tube from the canister (leak detection pump).
|
(c) Remove the 3 bolts and canister assembly. |
|
|
|