| Last Modified: 7-3-2017 | 6.8:8.0.40 | Doc ID: RM0000017ST005X |
| Model Year Start: 2007 | Model: LX470 | Prod Date Range: [08/2006 - ] |
| Title: 2UZ-FE EMISSION CONTROL: AIR FUEL RATIO SENSOR: REMOVAL; 2007 MY LX470 [08/2006 - ] | ||
REMOVAL
CAUTION:
- Wear protective gloves when removing the sensor.
- The exhaust pipe assembly is extremely hot immediately after the engine has stopped.
- Confirm that the exhaust pipe assembly has cooled down before removing it.
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
2.
REMOVE ENGINE UNDER COVER REAR
![2007 MY LX470 [08/2006 - ]; 2UZ-FE ENGINE MECHANICAL: TIMING BELT: REMOVAL+](../../../../stylegraphics/info.gif "2007 MY LX470 [08/2006 - ]; 2UZ-FE ENGINE MECHANICAL: TIMING BELT: REMOVAL+")
3. REMOVE AIR FUEL RATIO SENSOR (for Bank 1 Sensor 1)
(a) Disconnect the sensor connector.
|
(b) Using SST, remove the sensor. SST: 09224-00010 |
|
4. REMOVE AIR FUEL RATIO SENSOR (for Bank 2 Sensor 1)
(a) Disconnect the sensor connector.
|
(b) Using SST, remove the sensor. SST: 09224-00010 |
|
|
|