Last Modified: 7-3-2017 6.8:8.0.40 Doc ID: RM00000188M005X
Model Year Start: 2007 Model: LX470 Prod Date Range: [08/2006 -           ]
Title: 2UZ-FE STARTING: STARTER RELAY: ON-VEHICLE INSPECTION; 2007 MY LX470 [08/2006 -        ]

ON-VEHICLE INSPECTION

1. REMOVE STARTER RELAY

(a) Remove the engine room relay block cover.

(b) Remove the starter relay from the engine room relay block.

2. INSPECT STARTER RELAY

(a) Measure the resistance of the starter relay.

Standard resistance:

Tester Connection

Specified Condition

3 - 5

10 kΩ or higher

3 - 5

Below 1 Ω

(when battery voltage is applied to terminals 1 and 2)

If the result is not as specified, replace the relay.

3. INSTALL STARTER RELAY