| Last Modified: 7-3-2017 | 6.8:8.0.40 | Doc ID: RM0000018CN003X |
| Model Year Start: 2007 | Model: LX470 | Prod Date Range: [08/2006 - ] |
| Title: HF2A TRANSFER: TRANSFER SYSTEM: PRECAUTION; 2007 MY LX470 [08/2006 - ] | ||
PRECAUTION
When working with FIPG material, you must observe the following.
- Using a razor blade and gasket scraper, remove all the old FIPG material from the gasket surfaces.
- Thoroughly clean all components to remove all the loose material.
- Clean both sealing surfaces with a non-residue material.
- Apply FIPG in an approximately 1.2 mm (0.047 in.) wide bead along the sealing surface.
- Parts must be assembled within 10 minutes of application. Otherwise, the FIPG material must be removed and reapplied.
|
|