| Last Modified: 7-3-2017 | 6.8:8.0.40 | Doc ID: RM0000018DA003X |
| Model Year Start: 2007 | Model: LX470 | Prod Date Range: [08/2006 - ] |
| Title: HF2A TRANSFER: FRONT EXTENSION HOUSING: DISASSEMBLY; 2007 MY LX470 [08/2006 - ] | ||
DISASSEMBLY
|
1. REMOVE DRIVE CLUTCH HUB (a) Using a snap ring expander, remove the snap ring. (b) Using SST, remove the drive clutch hub. SST: 09950-40011 09951-04020 09952-04010 09953-04030 09954-04020 09955-04021 09957-04010 09958-04011 |
|
|
2. REMOVE FRONT OUTPUT SHAFT (a) Using a plastic-faced hammer, tap out the output shaft. |
|
3. REMOVE DUST DEFLECTOR
(a) Using SST, remove the dust deflector from the output shaft.
SST: 09950-40011
09951-04020
09952-04010
09953-04030
09954-04010
09955-04051
09957-04010
09958-04011
|
(b) Using a screwdriver and a hammer, tap the dust deflector and remove it from the extension housing. |
|
|
4. REMOVE OIL SEAL (a) Using a screwdriver, pry out the oil seal from the front extension housing. |
|
5. REMOVE BALL BEARING
(a) Using a screwdriver, remove the snap ring.
|
(b) Using SST and a press, press out the ball bearing. SST: 09316-60011 09316-00011 09316-00071 |
|
|
|