| Last Modified: 7-3-2017 | 6.8:8.0.40 | Doc ID: RM0000018DD003X |
| Model Year Start: 2007 | Model: LX470 | Prod Date Range: [08/2006 - ] |
| Title: HF2A TRANSFER: REAR EXTENSION HOUSING: DISASSEMBLY; 2007 MY LX470 [08/2006 - ] | ||
DISASSEMBLY
|
1. REMOVE OIL PUMP DRIVE SHAFT |
|
|
2. REMOVE OIL PUMP COVER (a) Using a T30 "torx" socket, remove the 3 screws. (b) Install the 2 suitable bolts to the pump cover. (c) Remove the pump cover from the rear extension housing. |
|
|
3. REMOVE OIL PUMP DRIVE ROTOR (a) Remove the drive rotor from the driven rotor. |
|
|
4. REMOVE OIL PUMP DRIVEN ROTOR (a) Remove the driven rotor from the rear extension housing. |
|
|
5. REMOVE SCREW PLUG, SPRING, BALL AND VALVE SEAT (a) Using a hexagon wrench, remove the screw plug. (b) Using a magnetic finger, remove the spring, ball and valve seat from the rear extension housing. |
|
|
6. REMOVE OIL PUMP PLATE (a) Remove the 3 bolts and oil pump plate. |
|
7. REMOVE SPEEDOMETER DRIVE GEAR
(a) Using a snap ring expander, remove the snap ring.
(b) Remove the speedometer drive gear.
|
8. REMOVE REAR OUTPUT SHAFT (a) Using a snap ring expander, remove the snap ring. (b) Using SST and a hammer, tap out the rear output shaft. SST: 09325-12010 (c) Remove the 2 seal rings from the rear output shaft. |
|
9. REMOVE DUST DEFLECTOR
(a) Using a screwdriver and hammer, tap out the rear extension housing dust deflector.
(b) Using a screwdriver and hammer, tap out the rear output shaft dust deflector.
|
10. REMOVE OIL SEAL (a) Using a screwdriver, pry out the oil seal from the rear extension housing. |
|
|
11. REMOVE BALL BEARING (a) Using a screwdriver, remove the snap ring. (b) Using SST and a press, press out the ball bearing from the rear extension housing. SST: 09316-60011 09316-00011 09316-00021 |
|
|
|