Last Modified: 7-3-2017 6.8:8.0.40 Doc ID: RM0000018HG003X
Model Year Start: 2007 Model: LX470 Prod Date Range: [08/2006 -           ]
Title: HF2A TRANSFER: TRANSFER OIL: ON-VEHICLE INSPECTION; 2007 MY LX470 [08/2006 -        ]

ON-VEHICLE INSPECTION

1. CHECK TRANSFER OIL

(a) Remove the case plug (filler plug) and gasket.

(b) Check that the oil level is between 0 to 5.0 mm (0 to 0.20 in.) from the bottom lip of the case plug (filler plug) hole.

If the result is not as specified, add transfer oil.

Oil grade:

GL-4 or GL-5

Viscosity:

SAE 75W-90

Standard capacity:

1.3 liters (1.4 US qts, 1.1 lmp.qts)

NOTICE:

  • After changing the oil, drive the vehicle and check the oil level again.
  • Too much or too little oil will lead to transfer problems.

(c) When the oil level is too low, check for oil leakage.

(d) Install a new gasket into the case plug (filler plug) and then tighten the plug.

Torque:

37 N·m {377 kgf·cm, 27ft·lbf}

2. ADD TRANSFER OIL

(a) Remove the case plug (filler plug) and gasket.

(b) Pour oil so that the oil level is between 0 to 5.0 mm (0 to 0.20 in.) from the bottom lip of the case plug (filler plug) hole.

NOTICE:

  • When adding oil, pour it slowly.
  • Add oil a little at a time, waiting several minutes between each addition of oil.

(c) Wait approximately 5 minutes and check that the oil level has not changed.

(d) Install a new gasket and the case plug (filler plug).

Torque:

37 N·m {377 kgf·cm, 27ft·lbf}