| Last Modified: 7-3-2017 | 6.8:8.0.40 | Doc ID: RM0000018NW006X |
| Model Year Start: 2007 | Model: LX470 | Prod Date Range: [08/2006 - ] |
| Title: POWER STEERING: VANE PUMP: INSTALLATION; 2007 MY LX470 [08/2006 - ] | ||
INSTALLATION
1. INSTALL VANE PUMP ASSEMBLY
(a) Torque the 3 bolts.
Torque:
17 N·m {175 kgf·cm, 13ft·lbf}
|
2. INSTALL PRESSURE FEED TUBE ASSEMBLY (a) Install new gaskets on each side of the tube and torque the union bolt. Torque: 50 N·m {510 kgf·cm, 37ft·lbf} HINT: Make sure that the stopper of the tube touches the vane pump body as shown in the illustration, then torque the bolt. |
|
3. CONNECT RETURN HOSE
(a) Install the clip.
4. CONNECT 2 VACUUM HOSES
(a) Install the 2 clips.
|
5. INSTALL FAN & GENERATOR V BELT (a) Loosen the drive belt tension by turning the drive belt tensioner counterclockwise, and install the belt. |
|
6. INSTALL AIR CLEANER ASSEMBLY WITH AIR CLEANER HOSE
(a) Tighten the 3 bolts.
(b) Tighten the clamp.
(c) Connect the hose.
(d) Connect the MAF meter connector.
7. INSTALL NO. 2 ENGINE UNDER COVER
(a) Tighten the 8 bolts.
8. INSTALL NO. 1 ENGINE UNDER COVER
(a) Tighten the 7 bolts.
9.
BLEED AIR FROM POWER STEERING SYSTEM
![2007 MY LX470 [08/2006 - ]; POWER STEERING: POWER STEERING SYSTEM: ON-VEHICLE INSPECTION+](../../../../stylegraphics/info.gif "2007 MY LX470 [08/2006 - ]; POWER STEERING: POWER STEERING SYSTEM: ON-VEHICLE INSPECTION+")
|
|