ENGINE HOOD / DOOR: REAR DOOR: ADJUSTMENT; 2007 MY LX470 [08/2006

Last Modified: 7-3-2017	6.8:8.0.40	Doc ID: RM0000018PF004X
Model Year Start: 2007	Model: LX470	Prod Date Range: [08/2006 - ]
Title: ENGINE HOOD / DOOR: REAR DOOR: ADJUSTMENT; 2007 MY LX470 [08/2006 - ]

ADJUSTMENT

1. ADJUST REAR DOOR PANEL SUB-ASSEMBLY

(a) Remove the front door scuff plate.

(b) Remove the rear door scuff plate.

(d) Remove the rear door opening trim.

(e) Remove the center pillar lower garnish.

(f) Loosen the body's hinge bolts and adjust the door's position.

Torque:

23 N·m {235 kgf·cm, 17ft·lbf}

(g) Loosen the door's hinge bolts and adjust the door's position.

(h) Tighten the door's hinge bolts after the adjustment.

Torque:

26 N·m {265 kgf·cm, 19ft·lbf}

2. ADJUST DOOR LOCK STRIKER

(a) Check that the door fit and door lock linkages are adjusted correctly.

(b) Loosen the striker mounting screws to adjust.

Torque:

11 N·m {115 kgf·cm, 8ft·lbf}