Last Modified: 7-3-2017 6.8:8.0.40 Doc ID: RM0000018RC005X
Model Year Start: 2007 Model: LX470 Prod Date Range: [08/2006 -           ]
Title: 2UZ-FE FUEL: FUEL PRESSURE REGULATOR: INSTALLATION; 2007 MY LX470 [08/2006 -        ]

INSTALLATION

1. INSTALL FUEL PRESSURE REGULATOR

(a) Apply a light coat of gasoline to a new O-ring, and install it to the pressure regulator.

(b) While turning the pressure regulator left and right, install it to the delivery pipe.

(c) Install the pressure regulator with the 2 bolts.

Torque:

7.5 N·m {77 kgf·cm, 66in·lbf}

(d) Connect the fuel return hose to the pressure regulator.

(e) Connect the vacuum sensing hose to the pressure regulator.

2. CHECK FOR FUEL LEAKS 2007 MY LX470 [08/2006 -        ]; 2UZ-FE FUEL: FUEL SYSTEM: ON-VEHICLE INSPECTION+

3. INSTALL V-BANK COVER 2007 MY LX470 [08/2006 -        ]; 2UZ-FE ENGINE CONTROL SYSTEM: CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY: INSTALLATION+

4. CONNECT CABLE TO BATTERY NEGATIVE TERMINAL

5. PERFORM INITIALIZATION

(a) Perform initialization 2007 MY LX470 [08/2006 -        ]; INTRODUCTION: REPAIR INSTRUCTION: INITIALIZATION .

NOTICE:

Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.