| Last Modified: 7-3-2017 | 6.8:8.0.40 | Doc ID: RM0000018RS005X |
| Model Year Start: 2007 | Model: LX470 | Prod Date Range: [08/2006 - ] |
| Title: AXLE: FRONT AXLE HUB: DISASSEMBLY; 2007 MY LX470 [08/2006 - ] | ||
DISASSEMBLY
1. REMOVE FRONT AXLE HUB OIL SEAL AND BEARING
(a) Using a screwdriver, pry out the oil seal.
(b) Remove the bearing from the axle hub.
2. REMOVE AXLE HUB BEARING OUTER RACE
(a) Using a brass bar and hammer, tap out the outside bearing outer race.
NOTICE:
Be careful not to damage the ABS speed sensor rotor.
|
(b) Using a brass bar and hammer, tap out the inside bearing outer race. |
|
3. INSPECT AXLE HUB BEARINGS
(a) Clean the bearings and outer races and inspect them for wear or damage.
|
4. REMOVE FRONT DISC (a) Mount the axle hub with the disc in a soft jaw vise. NOTICE: Close the vise until it holds the disc, and do not tighten it further. (b) Place matchmarks on the axle hub and disc. (c) Remove the 5 bolts and separate the axle hub and disc. |
|
|
|