| Last Modified: 7-3-2017 | 6.8:8.0.40 | Doc ID: RM0000018W8003X |
| Model Year Start: 2007 | Model: LX470 | Prod Date Range: [08/2006 - ] |
| Title: EXTERIOR: REAR BUMPER: INSTALLATION; 2007 MY LX470 [08/2006 - ] | ||
INSTALLATION
1. INSTALL REAR BUMPER COVER
(a) Install the bumper cover with the 4 bolts.
Torque:
19 N·m {195 kgf·cm, 14ft·lbf}
|
(b) Install the 4 bolts. Torque: 20 N·m {204 kgf·cm, 15ft·lbf} |
|
(c) w/ Tow hitch receiver:
Install the tow hitch receiver with the 4 bolts.
HINT:
Temporarily install the rear bumper cover before installing the tow hitch receiver.
Torque:
85 N·m {867 kgf·cm, 63ft·lbf}
(d) w/ Tow hitch receiver:
Install the rear bumper lower cover.
2. INSTALL QUARTER PANEL MUDGUARD SUB-ASSEMBLY REAR LH
(a) Attach the claw.
|
(b) Install the mudguard with the 6 screws and clip. |
|
3. INSTALL QUARTER PANEL MUDGUARD SUB-ASSEMBLY REAR RH
HINT:
Use the same procedures described for the LH side.
|
|