| Last Modified: 7-3-2017 | 6.8:8.0.40 | Doc ID: RM0000018YE006X |
| Model Year Start: 2007 | Model: LX470 | Prod Date Range: [08/2006 - ] |
| Title: 2UZ-FE EXHAUST: EXHAUST PIPE: REMOVAL; 2007 MY LX470 [08/2006 - ] | ||
REMOVAL
1. REMOVE HEATED OXYGEN SENSOR (for Bank 2 Sensor 2)
|
(a) Disconnect the sensor connector. |
|
|
(b) Using SST, remove the sensor. SST: 09224-00010 |
|
2. REMOVE HEATED OXYGEN SENSOR (for Bank 1 Sensor 2)
|
(a) Disconnect the sensor connector. |
|
|
(b) Using SST, remove the sensor. SST: 09224-00010 |
|
3. REMOVE TAILPIPE
|
(a) Remove the clamp, 2 rings and gasket. |
|
(b) Disconnect the tailpipe from the center exhaust pipe.
4. REMOVE CENTER EXHAUST PIPE
|
(a) Remove the 4 bolts, 4 nuts, 3 rings and exhaust pipe. |
|
(b) Remove the 2 gaskets.
5. REMOVE FRONT NO. 2 EXHAUST PIPE
(a) Remove the 2 bolts, 2 nuts and gasket.
(b) Remove the ring and front No. 2 exhaust pipe from the front exhaust pipe LH.
6. REMOVE FRONT EXHAUST PIPE RH
|
(a) Remove the 3 nuts, gasket and front exhaust pipe from the exhaust manifold. |
|
7. REMOVE FRONT EXHAUST PIPE LH
|
(a) Remove the 3 nuts, gasket and front exhaust pipe from the exhaust manifold. |
|
|
|