| Last Modified: 7-3-2017 | 6.8:8.0.40 | Doc ID: RM0000018Z400FX |
| Model Year Start: 2007 | Model: LX470 | Prod Date Range: [08/2006 - ] |
| Title: 2UZ-FE CHARGING: GENERATOR: REPLACEMENT; 2007 MY LX470 [08/2006 - ] | ||
REPLACEMENT
1. REPLACE GENERATOR DRIVE END FRAME BEARING
|
(a) Remove the 4 screws, bearing retainer and bearing. |
|
|
(b) Using SST and a hammer, tap out the bearing. SST: 09950-60010 09951-00250 SST: 09950-70010 09951-07100 |
|
|
(c) Using SST and a press, press in a new bearing. SST: 09950-60010 09951-00250 SST: 09950-70010 09951-07100 |
|
|
(d) Install the bearing retainer with the 4 screws. Torque: 2.3 N·m {23 kgf·cm, 20in·lbf} |
|
|
|