| Last Modified: 7-3-2017 | 6.8:8.0.40 | Doc ID: RM000001A3T006X |
| Model Year Start: 2007 | Model: LX470 | Prod Date Range: [08/2006 - ] |
| Title: AIR CONDITIONING: ROOM TEMPERATURE SENSOR (for Rear Air Conditioning System): REMOVAL; 2007 MY LX470 [08/2006 - ] | ||
REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
HINT:
At the time of installation, perform initialization
![2007 MY LX470 [08/2006 - ]; INTRODUCTION: REPAIR INSTRUCTION: INITIALIZATION](../../../../stylegraphics/info.gif "2007 MY LX470 [08/2006 - ]; INTRODUCTION: REPAIR INSTRUCTION: INITIALIZATION")
.
NOTICE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
2. REMOVE ROOM TEMPERATURE SENSOR
|
(a) Using a screwdriver, pull out the sensor, and then disconnect the connector. HINT: Tape the screwdriver tip before use. |
|
|
|