Last Modified: 7-3-2017 6.8:8.0.40 Doc ID: RM000001B5S003X
Model Year Start: 2007 Model: LX470 Prod Date Range: [08/2006 -           ]
Title: NAVIGATION: NAVIGATION SYSTEM: Cellular Phone cannot Send/Receive; 2007 MY LX470 [08/2006 -        ]

Cellular Phone cannot Send/Receive

INSPECTION PROCEDURE

PROCEDURE

1.

CHECK BLUETOOTH SETTINGS

(a) Check if the BLUETOOTH settings are correct.

OK:

BLUETOOTH settings are correct.

NG

SET SETTINGS CORRECTLY

OK

2.

CHECK CELLULAR PHONE

(a) Check if the cellular phone is BLUETOOTH capable.

HINT:

Some versions of BLUETOOTH capable cellular phones may not be compatible.

OK:

The phone is BLUETOOTH capable.

NG

END (ONLY A BLUETOOTH CAPABLE CELLULAR PHONE CAN BE USED)

OK

3.

CHECK SETTINGS

(a) Check if the cellular phone functions.

HINT:

  • The cellular phone is unable to make a call under any of the following conditions.
  • The cellular phone is locked.
  • The dictionary is being transferred.
  • The line is crossed.
  • Transmission is requested.
  • The power is off.
  • The cellular phone is not connected to BLUETOOTH ("BT" is displayed while a connection is present).

OK:

No of the above conditions exist.

NG

SET SETTING CORRECTLY

OK

4.

CHECK CELLULAR PHONE

(a) Check if the cellular phone can make a call.

HINT:

When the battery charge is low, calls cannot be made or received.

OK:

The cellular phone can make a call.

NG

REPLACE CELLULAR PHONE

OK

5.

CHECK RECEPTION

(a) Put a cellular phone into a receiving state.

(b) Place the cellular phone close to the multi-display.

(c) Check if the cellular phone has reception according to the multi-display.

OK:

The cellular phone has reception.

NG

REPLACE MULTI-DISPLAY

OK

PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE