Last Modified: 7-3-2017 6.8:8.0.40 Doc ID: RM000001BBH001X
Model Year Start: 2007 Model: LX470 Prod Date Range: [08/2006 -           ]
Title: STEERING COLUMN: VARIABLE GEAR RATIO STEERING SYSTEM: C1515/15; VGRS Actuator Neutral Position is not Initialized; 2007 MY LX470 [08/2006 -        ]

DTC

C1515/15

VGRS Actuator Neutral Position is not Initialized

DESCRIPTION

This code is set when the VGRS ECU or actuator has been replaced.

DTC No.

DTC Detection Condition

Trouble Area

C1515/15

When the VGRS actuator angle adjustment has not been performed
  • VGRS actuator
  • VGRS ECU

INSPECTION PROCEDURE

PROCEDURE

1.

ARE ANY OTHER VGRS CODES PRESENT?
YES

REPAIR CIRCUIT INDICATED BY DTC OUTPUT

NO

2.

PERFORM VGRS SYSTEM CALIBRATION
NEXT

3.

IS DTC C1516/16 OUTPUT? (VGRS ACTUATOR ANGLE ADJUSTMENT DID NOT COMPLETE NORMALLY)
NO

VGRS SYSTEM CALIBRATION IS COMPLETED

YES

Go to DTC 1516/16