| Last Modified: 7-3-2017 | 6.8:8.0.40 | Doc ID: RM000001BGJ004X |
| Model Year Start: 2007 | Model: LX470 | Prod Date Range: [08/2006 - ] |
| Title: SUPPLEMENTAL RESTRAINT SYSTEM: STEERING PAD: REMOVAL; 2007 MY LX470 [08/2006 - ] | ||
REMOVAL
CAUTION:
Be sure to read the precautionary notices concerning the SRS airbag system before servicing
![2007 MY LX470 [08/2006 - ]; SUPPLEMENTAL RESTRAINT SYSTEM: AIRBAG SYSTEM: PRECAUTION](../../../../stylegraphics/info.gif "2007 MY LX470 [08/2006 - ]; SUPPLEMENTAL RESTRAINT SYSTEM: AIRBAG SYSTEM: PRECAUTION")
.
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
2. REMOVE STEERING PAD ASSEMBLY
(a) Straighten the front wheels.
(b) Remove the steering wheel lower covers.
(c) Using a T30 "torx" socket, loosen the 2 screws until the groove along each screw circumference catches on the screw case.
|
(d) Pull out the steering pad from the steering wheel and support the steering pad with one hand as shown in the illustration. NOTICE: When removing the steering pad, do not pull the airbag wire harness. |
|
(e) Using a screwdriver, disconnect the 2 airbag connectors.
CAUTION:
When handling the airbag connector, do not damage the airbag wire harness.
(f) Disconnect the horn connector and remove the steering pad.
|
|