| Last Modified: 7-3-2017 | 6.8:8.0.40 | Doc ID: RM000001BMX004X |
| Model Year Start: 2007 | Model: LX470 | Prod Date Range: [08/2006 - ] |
| Title: 2UZ-FE COOLING: RADIATOR: DISASSEMBLY; 2007 MY LX470 [08/2006 - ] | ||
DISASSEMBLY
|
1. REMOVE SIDE SUPPORT (a) Remove the 4 nuts and 2 brackets. (b) Remove the 8 nuts and 2 side supports. |
|
2. REMOVE DRAIN PLUG
(a) Remove the drain plug.
(b) Remove the O-ring.
3. UNCAULK LOCK PLATE
(a) Install the claw to part A of the overhaul handle as shown in the illustration.
SST: 09230-01010
09231-01010
09231-01030
(b) While squeezing the handle, adjust the stopper bolt so that dimension B is as specified below.
Dimension B:
0.2 to 0.3 mm (0.008 to 0.012 in.)
|
(c) Using SST to release the caulking, squeeze the handle until stopped by the stopper bolt. SST: 09230-01010 09231-01010 09231-01030 |
|
|
4. REMOVE TANK AND O-RING (a) Lightly tap the bracket of the radiator (or radiator hose inlet or outlet) with a plastic-faced hammer and remove the tank. (b) Remove the O-ring. |
|
|
|