| Last Modified: 7-3-2017 | 6.8:8.0.40 | Doc ID: RM000001BU5007X |
| Model Year Start: 2007 | Model: LX470 | Prod Date Range: [08/2006 - ] |
| Title: BRAKE CONTROL: VEHICLE STABILITY CONTROL SYSTEM: TS and CG Terminal Circuit; 2007 MY LX470 [08/2006 - ] | ||
|
TS and CG Terminal Circuit |
DESCRIPTION
The sensor check circuit detects abnormalities in the speed sensor signal which cannot be detected by the DTC check.
Connecting terminals TS and CG of the DLC3 starts the check.
WIRING DIAGRAM
INSPECTION PROCEDURE
PROCEDURE
|
1. |
CHECK DLC3 (TS VOLTAGE) |
|
(a) Turn the ignition switch ON. (b) Measure the voltage between terminals 12 (TS) and 4 (CG) of the DLC3. OK: Standard voltage 10 to 14 V |
|
| OK |
|
|
|
2. |
CHECK WIRE HARNESS (DLC3 - SKID CONTROL ECU) |
| NG |
|
| OK |
|
|
|