| Last Modified: 7-3-2017 | 6.8:8.0.40 | Doc ID: RM000001CFE001X |
| Model Year Start: 2007 | Model: LX470 | Prod Date Range: [08/2006 - ] |
| Title: DOOR LOCK: WIRELESS DOOR LOCK CONTROL SYSTEM: DATA LIST / ACTIVE TEST; 2007 MY LX470 [08/2006 - ] | ||
DATA LIST / ACTIVE TEST
1. READ DATA LIST
HINT:
Using the DATA LIST displayed on the intelligent tester, you can read the value of the switch, sensor, actuator and so on without removing any parts. Reading the DATA LIST as a first step of troubleshooting is one way to shorten the labor time.
(a) Connect the intelligent tester (with CAN VIM) to the DLC3.
(b) Turn the ignition switch ON.
(c) Read the "DATA LIST" according to the display on the tester.
Wireless door lock control:
|
Item |
Measurement Item/ Display (Range) |
Normal Condition |
Diagnostic Note |
|---|---|---|---|
|
WIRELESS OPER |
Wireless door lock control function |
ON: Wireless door lock control functions OFF: Wireless door lock control does not function |
- |
|
HAZARD ANS BACK |
Hazard answer back of the wireless |
ON: Hazard answer back of the wireless is ON position OFF: Hazard answer back of the wireless is OFF position |
- |
Wireless door lock buzzer:
|
Item |
Measurement Item/ Display (Range) |
Normal Condition |
Diagnostic Note |
|---|---|---|---|
|
WIRELESS BUZZ VOL |
Wireless door lock buzzer volume |
OFF/MIN/MID3/MID2/MID1/MAX |
- |
|
DOWN/WIRELESS |
P/W DOWN w/ transmitter |
ON: P/W DOWN w/ transmitter ON position OFF: P/W DOWN w/ transmitter OFF position |
- |
|
AUTO LOCK DELAY |
Auto lock time |
30 s./60 s. |
- |
|
UNLOCK/2 OPER |
2 times operation wireless unlock |
ON: 2 times operation wireless unlock is ON position OFF: 2 times operation wireless unlock is OFF position |
- |
|
ALARM FUNCTION |
Panic function |
ON: Panic function is ON position OFF: Panic function is OFF position |
- |
|
OPEN DOOR WARN |
Open door warning buzzer |
ON: Open door warning buzzer is ON OF: Open door warning buzzer is OFF |
- |
2. PERFORM ACTIVE TEST
HINT:
Performing the intelligent tester's ACTIVE TEST allows relay, VSV, actuator and other item values to be operated without removing any parts. Performing the ACTIVE TEST early in troubleshooting is one way to save time. The DATA LIST can be displayed during the ACTIVE TEST.
DATA LIST can be displayed during the ACTIVE TEST.
(a) Connect the intelligent tester (with CAN VIM) to the DLC3.
(b) Turn the ignition switch ON.
(c) Perform the ACTIVE TEST according to the display on the tester.
Body ECU (Main)
|
Item |
Test Details |
Diagnostic Note |
|---|---|---|
|
BUZZ CONT SOUND |
Wireless buzzer ON/OFF |
- |
|
BUZZ RESP SOUND |
Wireless buzzer ON/OFF |
- |
|
|