| Last Modified: 7-3-2017 | 6.8:8.0.40 | Doc ID: RM000001CU0004X |
| Model Year Start: 2007 | Model: LX470 | Prod Date Range: [08/2006 - ] |
| Title: SUSPENSION CONTROL: ACTIVE HEIGHT CONTROL SUSPENSION: TS and CG Terminal Circuit; 2007 MY LX470 [08/2006 - ] | ||
|
TS and CG Terminal Circuit |
DESCRIPTION
By connecting terminals TS and CG of the DLC3, an input signal check can be performed
![2007 MY LX470 [08/2006 - ]; SUSPENSION CONTROL: ACTIVE HEIGHT CONTROL SUSPENSION: DIAGNOSIS SYSTEM](../../../../stylegraphics/info.gif "2007 MY LX470 [08/2006 - ]; SUSPENSION CONTROL: ACTIVE HEIGHT CONTROL SUSPENSION: DIAGNOSIS SYSTEM")
.
WIRING DIAGRAM
INSPECTION PROCEDURE
PROCEDURE
|
1. |
INSPECT DLC3 (TS VOLTAGE) |
|
(a) Turn the ignition switch ON. |
|
(b) Measure the voltage between terminals 12 (TS) and 4 (CG) of the DLC3.
Standard voltage:
9 to 14 V
| OK |
|
|
|
2. |
CHECK WIRE HARNESS (SUSPENSION CONTROL ECU - DLC3 AND BODY GROUND) |
| NG |
|
| OK |
|
|
|