| Last Modified: 7-3-2017 | 6.8:8.0.40 | Doc ID: RM000001DU5003X |
| Model Year Start: 2007 | Model: LX470 | Prod Date Range: [08/2006 - ] |
| Title: SUSPENSION CONTROL: PUMP ATTENUATOR: REMOVAL; 2007 MY LX470 [08/2006 - ] | ||
REMOVAL
|
1. DRAIN ACTIVE HEIGHT CONTROL SUSPENSION FLUID (a) Connect the hose to the bleeder plug for height control accumulator and loosen the bleeder plug. (b) After the fluid pressure has dropped and oil has drained out, tighten the bleeder plug remove the hose. Torque: 6.9 N·m {70 kgf·cm, 61in·lbf} |
|
2. REMOVE FRONT FENDER APRON SUB-ASSEMBLY
3. REMOVE PUMP ATTENUATOR
(a) Using SST, disconnect the inlet fluid from the pump attenuator.
SST: 09751-36011
Torque:
15 N·m {155 kgf·cm, 11ft·lbf}
|
(b) Using SST, disconnect the outlet fluid line from the pump attenuator. SST: 09023-38401 Torque: 30 N·m {310 kgf·cm, 22ft·lbf} |
|
(c) Remove the 2 bolts and pump attenuator.
Torque:
18 N·m {185 kgf·cm, 13ft·lbf}
(d) Remove the 2 collars and cushions.
|
|