Last Modified: 7-3-2017 6.8:8.0.40 Doc ID: RM000001DUE003X
Model Year Start: 2007 Model: LX470 Prod Date Range: [08/2006 -           ]
Title: SUSPENSION CONTROL: DAMPING FORCE CONTROL ACTUATOR: REPLACEMENT; 2007 MY LX470 [08/2006 -        ]

REPLACEMENT

1. REMOVE GAS CHAMBER

(a) Place damping force control actuator in a vise.

(b) Using SST, remove the gas camber.

SST: 09922-10010

(c) Remove the O-ring and back up ring from the gas chamber

2. INSTALL GAS CHAMBER

(a) Install a new back up ring and O-ring to the gas chamber.

NOTICE:

Be careful not to damage the O-ring.

(b) Coat the O-ring with suspension fluid AHC.

(c) Using SST, install the gas chamber.

SST: 09922-10010

Torque:

25 N·m {250 kgf·cm, 18ft·lbf}

HINT:

Use a torque wrench with a fulcrum length of 345 mm (13.58 in.).

NOTICE:

Use SST (09922-10010) in direction shown in the illustration.