| Last Modified: 7-3-2017 | 6.8:8.0.40 | Doc ID: RM000001DWC001X |
| Model Year Start: 2007 | Model: LX470 | Prod Date Range: [08/2006 - ] |
| Title: EXTERIOR: ROCKER PANEL MOULDING: REMOVAL; 2007 MY LX470 [08/2006 - ] | ||
REMOVAL
HINT:
- Use the same procedures for the RH side and LH side.
- The procedures listed below are for the LH side.
1. REMOVE SIDE STEP ASSEMBLY LH
|
(a) Remove the 8 bolts and side step. Torque: 5.0 N·m {51 kgf·cm, 44in·lbf} |
|
|
(b) w/ Running board lights: Remove the 8 bolts and disconnect the connector. Then remove the side step. |
|
2. REMOVE ROCKER PANEL MOULDING ASSEMBLY LH
|
(a) Remove the 10 screws. |
|
(b) Using a screwdriver, remove the rocker panel moulding.
HINT:
Tape the screwdriver tip before use.
|
|