| Last Modified: 7-3-2017 | 6.8:8.0.40 | Doc ID: RM000001G4L001X |
| Model Year Start: 2007 | Model: LX470 | Prod Date Range: [08/2006 - ] |
| Title: SERVICE SPECIFICATIONS: 2UZ-FE ENGINE CONTROL SYSTEM: SERVICE DATA; 2007 MY LX470 [08/2006 - ] | ||
SERVICE DATA
Intake air flow meter
|
Condition |
Specified Condition |
|---|---|
|
-20°C (-4°F) |
12.5 to 16.9 kΩ |
|
20°C (68°F) |
2.19 to 2.67 kΩ |
|
60°C (140°F) |
0.50 to 0.68 kΩ |
Camshaft timing oil control valve assembly
|
Condition |
Specified Condition |
|---|---|
|
Battery positive (+) voltage is applied |
Valve moves in left arrow direction shown in the illustration |
|
Battery positive (+) voltage is applied |
Valve moves in right arrow direction shown in the illustration |
Crankshaft position sensor
|
Temperature |
Specified Condition |
|---|---|
|
Cold |
1,630 to 2,740 Ω |
|
Hot |
2,065 to 3,225 Ω |
Engine coolant temperature sensor
|
Condition |
Specified Condition |
|---|---|
|
Approx. 20°C (68°F) |
2.32 to 2.59 kΩ |
|
Approx. 80°C (176°F) |
0.310 to 0.326 kΩ |
Throttle body
|
Tester Connection |
Condition |
Specified Condition |
|---|---|---|
|
2 (M+) - 1 (M-) |
20°C (68°F) |
0.3 to 100 Ω |
|
5 (VC) - 3 (E2) |
20°C (68°F) |
1.2 to 3.2 kΩ |
Knock sensor
|
Tester Connection |
Specified Condition |
|---|---|
|
Measure the resistance between the terminals. |
120 to 280 kΩ at 20°C (68°F) |
Accelerator POS No. 1 standard voltage
|
Condition |
Specified Condition |
|---|---|
|
Accelerator pedal is released |
0.5 to 1.1 V |
|
Accelerator pedal is depressed |
2.6 to 4.5 V |
Accelerator POS No. 2 standard voltage
|
Condition |
Specified Condition |
|---|---|
|
Accelerator pedal is released |
1.2 to 2.0 V |
|
Accelerator pedal is depressed |
3.4 to 5.0 V |
|
|