NOTICE:

• Never use SRS parts from another vehicle. When replacing the parts, replace them with new ones.
• Never reuse an occupant classification ECU involved in a collision when the airbag has deployed.
• If the occupant classification ECU has been dropped, or there are any cracks, dents or other defects in the case, bracket or connector, replace it with a new one.
• When installing the occupant classification ECU, make sure that the SRS wiring does not interfere with other parts and that it is not pinched between other parts.
• After installing the occupant classification ECU, check that there is no looseness.
• Remove the front seat cushion cover pad and front seat cushion cover together in order to avoid occupant classification sensor malfunctions.
• Replace the occupant classification ECU, occupant classification sensor, seat cushion cover pad, seat cushion cover and seat cushion seat heater as a set.