| Last Modified: 7-3-2017 | 6.8:8.0.40 | Doc ID: RM000002AFP004X |
| Model Year Start: 2007 | Model: LX470 | Prod Date Range: [08/2006 - ] |
| Title: SUPPLEMENTAL RESTRAINT SYSTEM: FRONT SEAT CUSHION ASSEMBLY (w/ Occupant Classification ECU, Occupant Classification Sensor): ON-VEHICLE INSPECTION; 2007 MY LX470 [08/2006 - ] | ||
ON-VEHICLE INSPECTION
1. INSPECT OCCUPANT CLASSIFICATION ECU (for Vehicle not Involved in Collision)
(a)
Perform a diagnostic system check
![2007 MY LX470 [08/2006 - ]; SUPPLEMENTAL RESTRAINT SYSTEM: AIRBAG SYSTEM: CHECK MODE PROCEDURE](../../../../stylegraphics/info.gif "2007 MY LX470 [08/2006 - ]; SUPPLEMENTAL RESTRAINT SYSTEM: AIRBAG SYSTEM: CHECK MODE PROCEDURE")
.
2. REMOVE OCCUPANT CLASSIFICATION ECU (for Vehicle Involved in Collision)
(a)
Perform a diagnostic system check
.
(b) Even if the airbag was not deployed, check if there is any damage to the occupant classification ECU. If there are any defects as mentioned below, replace the occupant classification ECU with a new one:
Cracks, dents or chips on the case.
Cracks or other damage to the connector.
CAUTION:
Be sure to follow the correct removal and installation procedures.
|
|