Home › Audio/Visual/Telematics › Audio/Video › AUDIO AND VISUAL SYSTEM
Last Modified: 11-27-2007 1.6 J
Service Category: Audio/Visual/Telematics Section: Audio/Video
Model Year: 2008 Model: LX570 Doc ID: RM000000OBM01KX
Title: AUDIO / VIDEO: AUDIO AND VISUAL SYSTEM: INSPECTION PROCEDURE (2008 LX570)

Cellular Phone cannot Send/Receive

INSPECTION PROCEDURE

HINT:

If the vehicle has a navigation system, "multi-display" refers to the "display and navigation module display".

PROCEDURE

1.

CHECK "BLUETOOTH" SETTING

(a) Check if the "Bluetooth" settings are correct.

OK:

"Bluetooth" settings are correct.

OK

2.

CHECK CELLULAR PHONE

(a) Check if the cellular phone is "Bluetooth" compatible.

HINT:

Some versions of "Bluetooth" compatible cellular phones may not function.

OK:

Phone is "Bluetooth" compatible.

OK

3.

CHECK SETTING

(a) Check if the cellular phone functions.

HINT:

The cellular phone is unable to call under any of the following conditions.

  • The cellular phone is locked.
  • The directory is being transferred.
  • The line is crossed.
  • Transmission is regulated.
  • The engine is off.
  • The cellular phone is not connected to "Bluetooth" ("Bluetooth" mark is displayed while connected).

    OK:

    Above conditions do not exist.

OK

4.

CHECK CELLULAR PHONE

(a) Check if the cellular phone can make calls.

HINT:

When the battery is low, calls cannot be made or received.

OK:

Cellular phone can make calls.

OK

5.

CHECK RECEPTION

(a) Set the cellular phone so that it can receive calls.

(b) Place the cellular phone close to the multi-display.

(c) Check if the cellular phone has reception according to the multi-display.

OK:

Cellular phone has reception.

Result

Result

Proceed to

OK

A

NG (w/ Navigation System)

B

NG (w/o Navigation System)

C
A