Home › Brake › Brake Control/Dynamic Control System › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: STEERING ANGLE SENSOR
Last Modified: 11-27-2007 1.6 G
Service Category: Brake Section: Brake Control/Dynamic Control System
Model Year: 2008 Model: LX570 Doc ID: RM000000SS7017X
Title: BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: STEERING ANGLE SENSOR: INSPECTION (2008 LX570)

INSPECTION

1. CHECK STEERING ANGLE SENSOR

(a) Check the steering angle sensor.

If any of the following applies, replace the sensor with a new one:

  • The surface of the sensor is cracked, dented, or chipped.
  • The connector is scratched, cracked, or damaged.
  • The sensor has been dropped.