SEAT BELT: REAR CENTER SEAT OUTER BELT ASSEMBLY (for Rear No. 1 Seat): INSPECTION (2008 LX570)

Home › Vehicle Interior › Seat Belt › REAR CENTER SEAT OUTER BELT ASSEMBLY (for Rear No. 1 Seat)

Last Modified: 11-27-2007		1.6 G
Service Category: Vehicle Interior	Section: Seat Belt
Model Year: 2008	Model: LX570	Doc ID: RM000000U9H00TX
Title: SEAT BELT: REAR CENTER SEAT OUTER BELT ASSEMBLY (for Rear No. 1 Seat): INSPECTION (2008 LX570)

INSPECTION

1. INSPECT NO. 1 SEAT 3 POINT TYPE BELT ASSEMBLY LH

(a) Check the ELR.

(1) When the inclination of the retractor is 15° or less, check that the belt can be pulled from the retractor. When the inclination of the retractor is over 45°, check that the belt locks.

If the operation is not as specified, replace the seat belt assembly.