Home Vehicle Interior Door Lock POWER DOOR LOCK CONTROL SYSTEM
Last Modified: 11-27-2007 1.6 D
Service Category: Vehicle Interior Section: Door Lock
Model Year: 2008 Model: LX570 Doc ID: RM000000WI3010X
Title: DOOR LOCK: POWER DOOR LOCK CONTROL SYSTEM: CUSTOMIZE PARAMETERS (2008 LX570)

CUSTOMIZE PARAMETERS

1. CUSTOMIZING FUNCTION WITH TECHSTREAM

HINT:

The following items can be customized.

NOTICE:

  • When the customer requests a change in a function, first make sure that the function can be customized.
  • Be sure to make a note of the current settings before customizing.
  • When troubleshooting a function, first make sure that the function is set to the default setting.

(a) Connect the Techstream to the DLC3.

(b) Turn the engine switch on (IG).

(c) Turn the Techstream on.

(d) Enter the following menus: Customize Setting.

(e) Select the setting by referring to the table below.

Door Lock

Display

Default

Contents

Setting

Unlock Key Twice

ON

Function that unlocks only the driver side door when the driver side door key cylinder is turned to unlock once, and unlock all doors when it is turned to unlock twice. For the OFF setting, turning it once unlocks all doors.

ON/OFF

Auto Lock

OFF

Function that locks all doors when the vehicle speed reaches a certain level.

ON/OFF

Auto Lock/Shift

ON

Function that locks all doors when the shift lever is moved from P to any position other than P while the engine running and all doors are closed.

ON/OFF

Auto Unlock/Shift

ON

Function that unlocks all doors when the shift lever is moved to P from any position other than P while the engine switch is on (IG).

ON/OFF

All Unlock/Open-Close

OFF

Function that unlocks the other doors when the driver side door is opened within 10 seconds after the engine switch is turned off.

ON/OFF