| Last Modified: 11-27-2007 | 1.6 J | |
| Service Category: Steering | Section: Steering Column | |
| Model Year: 2008 | Model: LX570 | Doc ID: RM000000XZE00ZX |
| Title: STEERING COLUMN: POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM: DESCRIPTION (2008 LX570) | ||
|
Tilt and Telescopic Manual Switch Circuit |
DESCRIPTION
The signals generated by operating the manual switch are sent to the multiplex tilt and telescopic ECU through the serial line.
INSPECTION PROCEDURE
PROCEDURE
|
1. |
READ VALUE USING TECHSTREAM (TILT AND TELESCOPIC MANUAL SWITCH) |
(a) Use the Data List to check if the tilt and telescopic manual switch is functioning properly.
Tilt & Telescopic
|
Tester Display |
Measurement Item/Range |
Normal Condition |
Normal Condition |
|---|---|---|---|
|
Tilt Up switch |
Input state of tilt up by manual switch/ON or OFF |
ON: Tilt up activated by manual switch OFF: Tilt up not activated by manual switch |
- |
|
Tilt Down Switch |
Input state of tilt down by manual switch/ON or OFF |
ON: Tilt down activated by manual switch OFF: Tilt down not activated by manual switch |
- |
|
Telesco Short Switch |
Input state of telescopic short by manual switch/ON or OFF |
ON: Telescopic short activated by manual switch OFF: Telescopic short not activated by manual switch |
- |
|
Telesco Long Switch |
Input state of telescopic long by manual switch/ON or OFF |
ON: Telescopic long activated by manual switch OFF: Telescopic long not activated by manual switch |
- |
OK:
"ON" is displayed on the Techstream screen when each switch is turned on.
"OFF" is displayed on the Techstream screen when each switch is turned off.
|
|
|