Home › Vehicle Interior › Theft Deterrent/Keyless Entry › SMART ACCESS SYSTEM WITH PUSH-BUTTON START (for Start Function)
Last Modified: 11-27-2007 1.6 D
Service Category: Vehicle Interior Section: Theft Deterrent/Keyless Entry
Model Year: 2008 Model: LX570 Doc ID: RM000000XZK01JX
Title: THEFT DETERRENT / KEYLESS ENTRY: SMART ACCESS SYSTEM WITH PUSH-BUTTON START (for Start Function): CUSTOMIZE PARAMETERS (2008 LX570)

CUSTOMIZE PARAMETERS

1. CUSTOMIZING FUNCTION WITH TECHSTREAM (REFERENCE)

NOTICE:

  • When the customer requests a change in a function, first make sure that the function can be customized.
  • Be sure to make a note of the current settings before customizing.
  • When troubleshooting a function, first make sure that the function is set to the default setting.

(a) Connect the Techstream to the DLC3.

(b) Turn the engine switch on (IG).

(c) Turn the Techstream on.

(d) Enter the following menus: Customize Setting.

(e) Select the setting by referring to the table below.

Smart Key / Access

Display

Default

Content

Setting

Ignition Available Area

All

Function to choose the available area for the key to start the engine and cancel the steering lock.

Front/All