Home Vehicle Exterior Window/Glass POWER WINDOW CONTROL SYSTEM
Last Modified: 11-27-2007 1.6 D
Service Category: Vehicle Exterior Section: Window/Glass
Model Year: 2008 Model: LX570 Doc ID: RM000000Z0T00SX
Title: WINDOW / GLASS: POWER WINDOW CONTROL SYSTEM: CUSTOMIZE PARAMETERS (2008 LX570)

CUSTOMIZE PARAMETERS

1. CUSTOMIZING FUNCTION WITH TECHSTREAM (REFERENCE)

NOTICE:

  • When the customer requests a change in a function, first make sure the function(s) can be customized.
  • Be sure to make note of the current settings before customizing.
  • When troubleshooting a function, first make sure that the function is set to the default setting.

(a) Connect the Techstream to the DLC3.

(b) Turn the engine switch on (IG).

(c) Turn the Techstream on.

(d) Enter the following menus: Customize Setting.

(e) Select the setting by referring to the table below.

Power Window

Display

Default

Contents

Setting

Door Key P/W Up

ON

Function that raises all the power windows when, with the engine switch off, a key is used to hold the driver door key cylinder to the lock position for more than 2.3 sec.

ON/OFF

Door Key P/W Down

ON

Function that lowers all the power windows when, with the engine switch off, a key is used to hold driver door key cylinder to the unlock position for more than 2.3 sec.

ON/OFF

P/W Down W/ Transmit

ON

Function that lowers all the power windows when, with the engine switch off, the unlock switch on the transmitter is pressed and held for more than 3.0 sec.

ON/OFF

P/W Up W/ Smart

ON

Function that raises all the power windows when, with the engine switch off, the entry lock switch on the driver side door outside handle is pressed and held for more than 3.0 sec.

ON/OFF